Product Introduction
Flexible Kapton Polyimide
Film Heater For 3D Printer
Polyimide is a thin, translucent
material, has excellent dielectric strength. In the narrow space or require
lighter, heater exposed to vacuum, oil or chemicals application environment,
polyimide heaters are ideal. Compared with silicone heating film, PET film or
ceramic electric heating film, polyimide is more compact.
kapton
heater,kapton film
heater,kapton flexible
heater ,foil kapton
heater
Polyimide Film Heater Characteristics
1) Heater thin and light so you can just
position on the need for heating without heating part can be avoided.
2) Etched foil heating technology provides fast and efficient heat transfer and
uniform heating surface, the temperature difference is minimal.
3) Customization options (for example: SMT components, flex cable and
connectors) can provide the perfect complete solution that can significantly
reduce assembly time and increase productivity.
4) Custom configured to provide balanced heating output performance to improve
process yield and productivity, in accordance with requirements of additional
temperature control device and temperature sensing devices.
5) There FEP adhesive can be 200 ° C (392 ° F)
6) Suitable for vacuum environments (NASA-RP-1061)
7) Resistant to most chemicals: acids and alkaline solvents erosion
8) If you are using polyimide insulated wires (custom option) can resist 106
rads of radiation, PSA adhesive stickers can be installed or epoxy adhesive,
silicone adhesive installation.
9) Providing a variety of complex shapes design, and different power designs.
Membrane in the same piece electrically heated heating circuit can be designed
and holding circuit
10) Providing a liquid immersion design (non-standard)
Product Parameters
Heater |
Polyimide Film Heater |
Operating temperature range °C(°F) |
-60C(-76)-220C(428) |
Dielectric strength at 20°C as per ASTM
KV/mm |
205 |
Thermal conductivity at 100°C W/m.k |
-- |
Bending radius,min.mm |
0.8 |
Resistance tolerance |
±7.5% or ±5% |
Max size mm |
W:500, L:900 |
Thickness mm |
0.13-0.4 |
Working life |
10Khr at 180°C |
Main Application
1.Medical diagnostic tools: heating
sample tray, reagent vase and etc.
2.Heating secondary planet component.
3.Protecting the mechanical and electronic equipment of plane in cold air.
4.Testing or simulating IC.
5.Outdoor electronic equipment such as card reader and LCD.
6.Keep constant in analysis instrument